|
|
|
|
|
|
| | | | Why Getting Your Own BRT 20-3 ?
|
In order to reduce the cost of the batteries in the logistic industry, it is a must to maintain your energy parc.
Maintenance can be done easily at a low cost with the BRT 20, and our broad client base, from the industry
to the logistics arena, can prove it.
regeneration is an innovative process giving the user the opportunity to dramatically reduce the energy costs
and the tons of rubbish which is a direct consequence of a non maintain battery parc. Undertaking environnment
becomes a must in all industries.
Your lift parc belongs to you :
- Amortization of your lifts is on line with the life span of their batteries (usually an average of 5 years).
With the regeneration the life span of your battery will be doubled. Amortization can then be extended
over 1, 2 or more years.
- Sulfation of your batteries increse the electromechanic breakdowns on your lifts. With the preventive
regeneration you can reduce up to 20 % of those electromechanic breakdowns.
- A sulfated battery is loosing about 10% of its capacity each year. When decreasing the capacity of 15%,
what should be done in 7 hours takes then 8 hours. Your company is then loosing money.
You can make your own simulation on the savings and the benefits the BRT 20-3 will generate.
At a glance you can see how your maintenance bill gets lower and simultaneously check the effects of a greater
amortization.
Get a better appraisal of your fleet requirements when regeneration provides full battery capacity for twice as long
as you use to do. |
|
DOWNLOAD REGENERATOR BRT-20 OPERATOR'S MANUAL
DOWNLOAD THE FINANCIAL SIMULATION OF YOUR PARC
DOWNLOAD EXCEL CALCULATION PAGE
|
| |
BRT 20 Battery Regenerator.jpg) .JPG)
Length= 70cm, width= 60cm, height= 120cm, weight= 160kg, power supply= 380 volts three phases 32A
First Tests
 |
 |
 |
Electrolyte test
|
tension test
|
cells evaluation
|
Tests are conducted from density measures, tension and liquid level. If no mechanical dammages,
any battery can be regenerated.
Regeneration starting process
 |
|
 |
workshop requires little space
|
safety connection
|
simple use keyboard
|
Once the battery is tested and the regenerator programmed, the process can start for 1 to 5 cycles
upon sulfation. ( Each cycle is 10 to 12 hours ).
Validation test
 |
 |
 |
a temperature censor guarantee
the safety of the process
|
amazing results
|
battery gets a new life
|
All along the process, the battery temperature is controlled by the regenerator.
Once regeneration cycles are over, new tests are conducted on the battery for validation.
| |
Once regeneration is over,
batteries recover their full capacities
and go back to service.
Battery regeneration electricity
cost is less than 5 euros !
| | 
|
|
|
|
|
| | |
| |